- Heel Clicker Clutch Systems -
Polaris
Set-Up & Performance Tuning Data
We've posted set-up and tuning information from "Heel Clicker"
users and field testers all over the country. Below you can find
specific performance tuning data to aid in optimizing your
Heel Clicker Clutch System for certain applications and conditions.
We ask you to submit your results too.
We'll list them on the chart below to help others
get the most out of their "Heel Clicker's" too.
---NOTE---
-This chart is a work in progress & is updated regularly.-
-It can take a while to load on a slower connection.-
-Last update --
October 03, 2004-
WEIGHT ADDED (gr.) |
WEIGHT ADDED (gr.) |
WEIGHT ADDED (gr.) |
||||||||||||||||||||
SLED MAKE/ MODEL/YEAR |
HEEL CLICKER WEIGHT |
HEEL- SHOULDER |
CENTER | TIP | PRIMARY SPRING |
APPROX. ENGAGE RPM |
APPROX. PEAK RPM |
INSTALL COMMENTS |
PERFORMANCE COMMENTS (primary) |
OTHER COMMENTS |
HELIX | DRIVEN SPRING & SETTING |
PERFORMANCE COMMENTS (driven) |
RIDING ALTITUDE |
RIDING TYPE |
OTHER COMMENTS |
CITY | STATE | NAME/EMAIL (optional) |
|||
POL-XC500 | 55-7 | 2.0 | 0 | 0 | HC-Gold | 5300 | R-8 | stock-#3 | ||||||||||||||
POL-XC600SP | 55-7 | 4.0 | 3.0 | 0 | HC-Gold | 5100 | R-8 | stock-#3 | ||||||||||||||
POL-XC600SP/2003 | 55-7 | 5.2 | 4.0 | 0 | HC-Gold | 0-3000 | Trail-Aggressive | would like some ideas on more combinations to try | Charlottetown | Prince Edward Island CANADA | buckracer24@hotmail.com | |||||||||||
POL-XC700 | 55-7 | 4.0 | 3.0 | 0 | HC-White | |||||||||||||||||
POL-XC700/1998 | 55-7 | 4.7 | 0 | 5.1 | HC-Gold | ~4200 | 8000 @ WOT | 30 mins to install Weighed all pieces on 0.000g scale.(all parts weigh under book spec.) |
add velcro to handlebars! | 5000 rpm-slow cruz 30mph 6000 rpm-HOLD ON!! |
50/34 | Polaris Button Erl. Purple @ 12# |
no track spin off line(~40mph starts to slip though) | 0-3000 | Trail - Aggressive | A great trail and speed blend | Trumansburg | NY | Mikel MBen8@AOL.com |
|||
POL-XCSP700/2002 | 55-7 | 3.5 | 3.0 | 6.0 | HC-Gold | didn't shim spider | pulls hard now traction a prob | no more belt slipping | 52-34 | white Erlandson | stock | 0-3000 | Trail - Aggressive | if it isn't broke play with it till it is | Lindsay | Ontario | John Kuypers | |||||
POL-XC700/2002 | 55-7 | 3.4 | 4.4 | 5.2 | HC-Gold | 4400 | Ran 4.4g in center and tip last year. Added 0.8g to tip this year to try and get more top end pull. My base weights weighed in at 63.6g. | Have done three separate sleds. Need the proper tools. | 48/36 Dalton | EPI purple 3rd hole | ran a 50/36 helix last year. Engine pulled 7800 to 7900 rpms. | 0-3000 | Trail-Aggressive | larrypolaris@yahoo.com | ||||||||
POL-XC800 | 55-7 | 6.0 | 5.0 | 2.0 | HC-White | |||||||||||||||||
POL-XCR800 | 55-7 | 5.0 | 5.0 | 0 | HC-White | |||||||||||||||||
POL-Edge440 | 45-7 | 2.0 | 2.0 | 0 | HC-Black | |||||||||||||||||
POL-RMK700 | 50-7 | 4.0 | 4.0 | 0 | HC-Black | |||||||||||||||||
POL-RMK700/2000 | 55-7 | 3.9 | 3.0 | 0 | HC-Black | 4500 | 8100 | ok | improvement over stock | n/a | R-11 | stock-#3 | ok | 4-8000 | off-trail | |||||||
POL-RMK700/2000 | 55-7 | 0.0 | 4.4 | 0 | HC-Gold | 4700 | 8500 | Easy to install/modify clutch..30 minutes | It ripps off the line. This is a highly modified engine..approx.175 H.P. | As the engine has little low end power I think I need to find a spring to bring engagement up to 5500/still the best set up yet!!! | Erlandson Artic Cat secondary gearing is 2.22:1 |
Powder | Fast trail/deep powder/hillclimbing/ | Randolph | Utah | Ken, domion@zdnetmail.com | ||||||
POL-RMK700/1998 | 55-7 | 5.0 | 4.0 | 0 | HC-Gold | Sled is pipe SLP twins,Delta reeds,Trail porting,High mark heads | Pulls very hard out of the hole then very good in the mid range then equal to stock in the top end. | 54-44 | A-Cat Yellow #1 | A-Cat Secondary | Drag | Edmonton | Alberta, Canada | Brian D bdublanko@hotmail.com |
||||||||
POL-RMK700/2000 | 55-7 | 2.0 | 5.4 | 0 | HC-Gold | Easy to install--30 minutes | Highly modified engine | This setup works the best so far... | 49 | Erlandson Cat secondary | Utah | Ken domion@zdnetmail.com |
||||||||||
POL-RMK800 | 55-7 | 5.0 | 2.0 | 0 | HC-Black | |||||||||||||||||
POL-800RMK/2000 | 55-7 | 6.0 | 0 | 5.0 | HC-Gold | n/a | n/a | n/a | n/a | n/a | R-8 | stock-#3 | n/a | n/a | n/a | n/a | n/a | n/a | n/a | |||
POL-800RMK/2000 | 55-7 | 6.0 | 6.0 | 0 | HC-Red | 3900 | 8100 | no problems | pulls very hard, upshifts fast | using HC billet cover kit | R-8 | stock-#3 | good back shift | 5-9000 | off-trail/powder | need to re-bush weights around 600 miles | n/a | ID | n/a | |||
POL-800RMK/2001 | 55-7 | 6.4 | 4.0 | 3.0 | SkiDoo green/blue 200-290 | 3750 | 8000 | didn't use the spider shim | best kit yet- hard to hang on to! | using HC billet cover kit with TRA spring | 42 degree HeelX | A-Cat Red #2 | A-Cat driven clutch | 3-8000 | off-trail/powder | Spokane | WA | n/a | ||||
POL- XC800/2002 | 55-7 | 7.0 | 4.5 | 6.0 | White | |||||||||||||||||
"Heel Clicker"TM is a trademarked name and patents are pending by & for Super Torquer Inc. All rights reserved.
All rights reserved. Copyright © 1997-2004 SledGear.Com